Key Features

Features For Each Demodulator

- CDD-564 & CDD-564EN: 50 to 90 or 100 to 180 MHz IF range

- CDD-564L & CDD-564LEN: 950 to 1950 MHz each demodulator

- 16 kbps to 9.98 Mbps data rate

- Fast acquisition demodulator

- BPSK, QPSK demodulation (8-PSK/8-QAM, 16-QAM optional)

- LNB support: 10 MHz reference and LNB power

- 2nd Generation Turbo Product Coding (TPC) forward error correction

Standard Features

- Static IP routing for unicast and multicast

- Management via SNMP, Web or Telnet

- IGMP v1 and v2

- Support for point-to-point, point-to-multipoint and hybrid network topologies

- 10/100 BaseT Ethernet data interface (RJ‑45)

- Firmware upgrade via FTP

- FAST feature upgrades at the factory or in the field

- Front Panel LEDs for Unit Status, Stored Event and the status of each of the four receive channels

- Interoperable with the CDM‑570/L-IP, CDM‑IP 550, and CDM‑IP 300L

Advanced IP Options

- Quality of Service (QoS) – The CDD-564/L transparently passes the QoS prioritization established at the transmit end by the CDM-570/L-IP Satellite Modem.

- Header Compression – Reduces the bandwidth required for Voice over Internet Protocol (VoIP) by as much as 60%.  Typical Web/HTTP traffic can be reduced by 10% via IP/TCP header compression. Each demodulator can be independently configured for header decompression.

- Payload Compression – Can reduce the required satellite bandwidth by up to 40%. Each demodulator can be independently configured for payload decompression.

- Vipersat Management System (VMS) – Integrates with the powerful network management tool Vipersat Management System (VMS). In addition to the traditional Monitoring and Control of the CDM-570/L-IP modems, CDD-564/L and CDD-562L demodulators, the VMS allows these devices to share bandwidth, and when needed, switch automatically to a dedicated SCPC channel.

Data Encryption