detailed description
Product Description
Specifications
Intermediate Freq. Band: L-band
Tx Frequency Range: 950-1950 MHz
Rx Frequency Range: 950-1950 MHz
Tuning Step Size: 100 Hz
Min Data Rate, kbps: 4.8 kbps*
Max Data Rate, Mbps: 10 Mbps**
Data Rate Resolution: 1 bps
Symbol Rate Range: Corresponds to data rate range
Modulation Scheme: BPSK,QPSK,OQPSK,8PSK,8QAM,16QAM
Forward Error Correction: Viterbi,Reed-Solomon,Sequential,Trellis (TCM),Turbo (TPC),LDPC
Data Traffic Interface: RS422,X.25,V.35,RS232,G.703,Ethernet IP 10/100 Base-T,Optional: Quad E1
Output Power Level: -5 to -30 dBm variable in 0.1 dB steps
Output Level Stability: ± 0.5 dB over 0-40°C
Occupied Bandwidth: 1.2 x Symbol Rate
Recommended Channel Spacing: 1.4 x Symbol Rate
Amplitude Accuracy: ±0.2 dB
Tx IF Impendance: 50 Ohm
Tx Connector Type: Type N
Tx Return Loss: 14 dB typical
Output Phase Noise: As IESS-308, normally 3dB better
Output Frequency Stability: 4 E-8/yr
Harmonics: < -55 dBc/ 4kHz in band
Output Spurious: < -55 dBc/ 4kHz in band
Phase Accuracy: ±2 ° max
Carrier On/Off Isolation: > 55 dB
Scrambler Types: IBS, V.35, IESS, TPC, RS, ESC
Tx Data Clock Sources: Internal, External, Rx Clock
Internal Stability: ±1 ppm (Standard)
External Reference: Clocking Only: 1-10 MHz in 1 kHz steps; Clocking and RF Frequency: 10 MHz,0 dBm±1 dB
Adaptive Signal Predistorter: Yes
Rx Сarrier Input Range: Minimum level;-130dBm +10 log symbol rate,range 50dB above min,limited to -20dBm max
Maximum Composite Signal: 30 dB above level of desired input up to maximum of -10 dBm
Rx IF Impendance: 50 Ohm
Rx Connector Type: Type N
Rx Return Loss: 14 dB typical
Rx Acquisition Range: Selectable from ± 1 kHz to ± 32 kHz in 1 kHz steps
Acquisition Threshold: <5 dB Es/No QPSK
Acquisition Time: At 9.6kbps,less than 1s at 6dB Es/No.QPSK; At 10 Mbps,less than 100ms at 6dB Es/No.QPSK
Clock Tracking Range: ± 100 ppm minimum
Receive Filtering: Intelsat IESS compliant α = 0.35
Descrambler Types: IBS, V.35, IESS, TPC, RS, ESC
Receive Buffer Size: Selectable in 1ms increments from 0ms to 99ms. Automatically adjusted to slip an integer number of terrestrial multi-frame lengths for framed rates. Buffer storage: Maximum buffer size ? 256kbytes
Rx Data Clock Sources: Internal, External, Tx Input Clock, Receive Clock, Station Reference
AGC Output: Yes
Paired Carrier Re-use: Yes
Paired Carrier Specification: Optional: Use with 16QAM to relax HPA backoff by up to 1.6 dB. Compensates for HPA non-linearities
AUPC: Yes. The AUPC requires dedicated use for ESC channel (300 baud)
Framing and Deframing: Closed Network, Closed Network + ESC, IBS/SMS (option) and IDR (option)
ESC/AUX Port: RS-232, RS-422 or RS-485
Drop and Insert: Yes
Ethernet/IP Features: Ethernet IP 10/100 Base-T interface, available in Bridging or Brouting modes (optional)
User Interface: LCD keybord on front panel. Web User Interface available via embedded web server. Includes Receive Spectrum Analyzer,Receive Constellation Monitor,BER Tester and graphing Eb/No,Rx Power,BER plus other parameters,using Internet Explorer. Logged graph data can be sent via email to any email address.
Remote Monitor and Control: For multi-drop applications,RS485 interface. For direct to PC applications,RS232 interface (front panel selectable). M&C port may be directly internally linked to ESC port for "over-the-satellite" M&C without cabling. Ethernet (10/100 BaseT) via RJ45, embedded Web server,SNMP agent V1,V2c and V3
Diagnostics: IF,Interface,Framer,FEC and RS loopbacks;built-in bidirectional BERT;Transmit CW (Pure Carrier);Transmit Alternate 1-0 Pattern;Wideband spectrum analyzer display and constellation display;EZ Audio: 1kHz test tone on audio channels in IDR and P1348 emulation modes
Redundancy : Built in 1:1 redundancy
Power Supply: 100 to 240 VAC,+6%,-10%,1 A @ 100V,0.5 A @ 240 V,47-63 Hz,Fused IEC connector,48 VDC option
BUC Power Supply:
Mains input,+48V DC 2A output (100W) to BUC via Tx IFL
Mains input, +24V DC 4A output (100W) to BUC via Tx IFL
Mains input, +48V DC 3.5A output (180W) to BUC via Tx IFL
Mains input, +24V DC 6A output (180W) to BUC via Tx IFL
+48V DC input, +48V DC 3.5A output (180W) to BUC via Tx IFL
±48V DC input, +24V DC 6A output (180W) to BUC via Tx IFL
±48V DC input, +48V DC 3.5A output (180W) to BUC via Tx IFL
BUC Power Supply is internal
LNB Power: User selectable: +15/24 V 0.5 A DC to LNB via IFL
BUC FSK control: Requires a BUC Power Supply to be fitted. Allows monitor & control of a compatible BUC from the Modem,via the Tx IFL
BUC Reference: 10MHz may be provided via the Tx IFL to the BUC (between 0 & -3dBm) and via the Rx IFL to the LNB (between 0 & +3dBm)
Operating Temperature Range: 0 to 50 C
Operating Relative Humidity: N/D
Size: 1 RU,483 mm(W) x 305 mm(D) x 44.5 mm(H),(19" x 12" x 1.75")
Weight: 3.5 kg (7.7 lbs)
Shipping Weight & Dims: 1 unit box: 8.6 kg (19 lbs),584 mm x 584 mm x 178 mm,(23" x 23" x 7"); 2 unit box: 15.0 kg (33 lbs),584 mm x 584 mm x 330 mm,(23" x 23" x 13")
Notes: * Min data rate @ 1/2 BPSK,** Max data rate depends on activated license
More technical product information can be found on the datasheet. Please use our PDF download option.
