- Wide bandwidth, 930 to 2300 MHz standard

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 0 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control.  A Loss of Carrier indicator is provided in the event the tracking signal is lost.  Form "C" relay contacts provide an external Loss of Carrier Alarm.  A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,080.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- Conversion Type: LNB to be mounted at the Antenna with WR-75 flange

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-dection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,850.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- Conversion Type: LNB to be mounted at the Antenna with WR-75 flange

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-dection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,850.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- Conversion Type: LNB to be mounted at the Antenna with WR-75 flange

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-dection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,850.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-dection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 5,386.15

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-dection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 5,386.15

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-dection bandwidth

- Input Connector on Rear of BTR: 50 ohm SMA female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 8,085.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 5,390.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- Conversion Type: LNB to be mounted at the Antenna with WR-229 flange

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,850.00

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Ethernet connectivity with M&C control interface

- NEW Version 2.0 M&C control interface allows for remote monitoring from one or multiple locations

- RS-232/422/485 and Ethernet All Standard

- Temperature stabilization compensation

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control.  A Loss of Carrier indicator is provided in the event the tracking signal is lost.  Form "C" relay contacts provide an external Loss of Carrier Alarm.  A front panel VFD displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,080.00

- AFC disable option for wide data carrier applications

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- BPSK Modulation compatible

- Accu-trac signal tracking feature for Ka or high drift LNB applications with selectable acquisition bandwidths up to ±800 kHz

- RS-232/422/485 and Ethernet, control interface, all Standard / Front panel selectable

- Dual signal strength output / 2 identical analog outputs for simultaneous antenna tracking and UPC control

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

- Optional Continuous Data Streaming

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,465.00

- AFC disable option for wide data carrier applications

- Digital level reference setting, -30 to -90 dBm on 0.5 dB steps

- Accu-trac signal tracking feature for high drift LNB applications with selectable acquisition bandwidths up to ±800 kHz

- RS-232/422/485 and Ethernet, control interface, all Standard / Front panel selectable

- Dual signal strength output / 2 identical analog outputs for simultaneous antenna tracking and UPC control

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 5,771.15

- AFC disable option for wide data carrier applications

- Digital level reference setting, -10 to -70 dBm on 0.5 dB steps

- BPSK Modulation compatible

- Accu-trac signal tracking feature for high drift LNB applications with selectable acquisition bandwidths up to ±800 kHz

- RS-232/422/485 and Ethernet, control interface, all Standard

- Dual signal strength output / 2 identical analog outputs for simultaneous antenna tracking and UPC control

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm BNC female connector

- Optional Continuous Data Streaming

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 3,465.00

- AFC disable option for wide data carrier applications

- Digital level reference setting, -30 to -90 dBm on 0.5 dB steps

- Accu-trac signal tracking feature for Ka or high drift LNB applications with selectable acquisition bandwidths up to ±800 kHz

- RS-232/422/485 and Ethernet, control interface, all Standard / Front panel selectable

- Dual signal strength output / 2 identical analog outputs for simultaneous antenna tracking and UPC control

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 5,775.00

- AFC disable option for wide data carrier applications

- Digital level reference setting, -30 to -90 dBm on 0.5 dB steps

- Accu-trac signal tracking feature for Ka or high drift LNB applications with selectable acquisition bandwidths up to ±800 kHz

- RS-232/422/485 and Ethernet, control interface, all Standard / Front panel selectable

- Dual signal strength output / 2 identical analog outputs for simultaneous antenna tracking and UPC control

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 5,775.00

- AFC disable option for wide data carrier applications

- Digital level reference setting, -40 to -100 dBm on 0.5 dB steps

- Accu-trac signal tracking feature for Ka or high drift LNB applications with selectable acquisition bandwidths up to ±800 kHz

- RS-232/422/485 and Ethernet, control interface, all Standard / Front panel selectable

- Dual signal strength output / 2 identical analog outputs for simultaneous antenna tracking and UPC control

- Conversion Type: LNB to be mounted at the Antenna with a WR-42 flange

- AFC and Filtering: Standard AFC and Standard 0.4 Hz output smoothing filter

- Bandwidth: 50 kHz pre-detection bandwidth

- Input Connector on Rear of BTR: 50 ohm N female connector

The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form "C" relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 8,085.00