Key Features

Features For Each Demodulator

- CDD-564 & CDD-564EN: 50 to 90 or 100 to 180 MHz IF range

- CDD-564L & CDD-564LEN: 950 to 1950 MHz each demodulator

- 16 kbps to 9.98 Mbps data rate

- Fast acquisition demodulator

- BPSK, QPSK demodulation (8-PSK/8-QAM, 16-QAM optional)

- LNB support: 10 MHz reference and LNB power

- 2nd Generation Turbo Product Coding (TPC) forward error correction

Standard Features

- Static IP routing for unicast and multicast

- Management via SNMP, Web or Telnet

- IGMP v1 and v2

- Support for point-to-point, point-to-multipoint and hybrid network topologies

- 10/100 BaseT Ethernet data interface (RJ‑45)

- Firmware upgrade via FTP

- FAST feature upgrades at the factory or in the field

- Front Panel LEDs for Unit Status, Stored Event and the status of each of the four receive channels

- Interoperable with the CDM‑570/L-IP, CDM‑IP 550, and CDM‑IP 300L

Advanced IP Options

- Quality of Service (QoS) – The CDD-564/L transparently passes the QoS prioritization established at the transmit end by the CDM-570/L-IP Satellite Modem.

- Header Compression – Reduces the bandwidth required for Voice over Internet Protocol (VoIP) by as much as 60%.  Typical Web/HTTP traffic can be reduced by 10% via IP/TCP header compression. Each demodulator can be independently configured for header decompression.

- Payload Compression – Can reduce the required satellite bandwidth by up to 40%. Each demodulator can be independently configured for payload decompression.

- Vipersat Management System (VMS) – Integrates with the powerful network management tool Vipersat Management System (VMS). In addition to the traditional Monitoring and Control of the CDM-570/L-IP modems, CDD-564/L and CDD-562L demodulators, the VMS allows these devices to share bandwidth, and when needed, switch automatically to a dedicated SCPC channel.

Data Encryption

Price:€ 0.00

 Key Features

- DoubleTalk Carrier‑in‑Carrier bandwidth compression

- Adaptive Coding and Modulation (ACM)

- Dual Band Capability: 70/140 MHz and L-Band in same unit

- Data Rate: 18 kbps to 25 Mbps

- Symbol Rate: 18 ksps to 12.5 Msps

- Modulation: BPSK, QPSK/OQPSK, 8-PSK/8-QAM, 16-QAM

- Forward Error Correction (FEC): Viterbi, Sequential, Concatenated Reed Solomon, TCM, Turbo Product Code (TPC) (IESS 315 Compliant), Low Density Parity Check (LDPC) Code and VersaFEC (low latency LDPC)

- Widest Range of Data Interfaces: EIA-422/530, V.35, G.703 T1, G.703 E1, G.703 T2, G.703 E2, Quad G.703 E1, ASI, LVDS, HSSI, 4-port 10/100 BaseT Ethernet

- 4-port Managed Ethernet Switch with VLAN and QoS

- Sub Mux to multiplex IP/Ethernet traffic with serial or G.703 traffic

- Drop & Insert for T1/E1

- Enhanced D&I++ for Single T1/E1 & Quad E1

- Management: 10/100 BaseT Ethernet with SNMP, Distant End SNMP Proxy, HTTP and Telnet and EIA-232/EIA-485

- Embedded Distant end Monitor and Control (EDMAC)

- Automatic Uplink Power Control (AUPC)

- Engineering Service Channel (ESC/ESC++)

- Standard High Stability Internal Reference (±6 x 10^-8)

- 5-tap Adaptive Equalizer

- L-Band Tx: 10 MHz reference for BUC, FSK communications and optional BUC power supply

- L-Band Rx: 10 MHz reference and LNB power supply

- Open Network Modes

- CDM-600/L emulation mode

- 1:1 and 1:10 Redundancy Switches Available

- Backwards compatible with CDM-500/CDM-550, CDM-550T, CDM-570/L and CDM-600/L

- Interoperable with many Comtech EF Data satellite modems: CDM-Qx/L, SDM-8000, 300A, and 300L3

Typical Users

- Telecom Operators

- Mobile Operators

- Satellite Service Providers

- Government & Military

- Enterprise

- Offshore

Common Applications

- Cellular Backhaul

- Providing T1/n x E1/T2/E2 Connectivity

- Transmission of Voice, Video & Data

- High Speed Trunking

- Offshore Communications

- Communications-on-the-Move
  (Land Vehicles/Trains)

- Satellite News Gathering

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Key Features

- 52 to 88 MHz or 104 to 176 MHz in 100 Hz Steps

- 950 to 1950 MHz Tx (L-Band Option)

- Generic data transmission (any non-MPEG-2 data)

- DVB-S2 per EN 302 307

- 1 to 45 Msps, QPSK and 8-PSK

- 1 to 35 Msps, 16-APSK

- 1 to 28 Msps, 32-APSK

- Constant Coding and Modulation (CCM) operation

- Generic data transmission (DVB-S2)

- CDI-10-1 G.703 E3/T3/STS-1 data rates

- CDI-60 HSSI data interface up to 70 Mbps

- CDI-70 Gigabit Ethernet over all data rates

- Spectral rolloff of 20, 25 or 35%

- 50Ω or 75Ω Impedance (70/140 MHz)

- 50Ω Impedance (L-Band)

- Unit Management: RS-232 / RS-485, 2 Wire / 4 Wire or 10/100 BaseT Ethernet

- SNMP, Telnet or HTTP

- Flash Upgrade

- FAST Options

Typical Users

- Enterprise

Common Applications

- Transmission of Non-Transport Stream Data

- Business Data Distribution

- Broadband Interactive & Internet Services

- Point-to-Point & Multipoint Environments

- Arbitrary Topology

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Key Features

- 52 to 88 MHz or 104 to 176 MHz in 100 Hz Steps

- 950 to 1950 MHz Tx (L-Band Option)

- DVB-S (QPSK) / per EN 300 421, 1 to 45 Msps

- DVB-DSNG (8-PSK, 16-QAM) per EN 301 210, 1 to 45 Msps

- DVB-S2 (QPSK, 8-PSK, 16-APSK) per EN 302 307

- 1 to 45 Msps (QPSK, 8-PSK), 35 Msps (16-APSK) and
28 Msps (32-APSK)

- Constant Coding and Modulation (CCM) operation

- Generic data transmission (DVB-S2)

- HSSI data interface (CDI-60)

- Spectral rolloff of 20, 30 or 35%

- 50Ω or 75Ω Impedance (70/140 MHz)

- 50Ω Impedance (L-Band)

- Unit Management: RS-232 / RS-485, 2 Wire / 4 Wire or 10/100 BaseT Ethernet

- SNMP, Telnet or HTTP

- Flash Upgrade

- FAST Options

- CDI-40 ASI Interface (188 or 204 byte format)

- CDI-70 Gigabit Ethernet Interface (188 byte format)

- CDI-60 HSSI (188 byte or generic)

Typical Users

- Broadcasters

- Enterprise

Common Applications

- Direct To Home

- Content Contribution & Distribution

- DVB-S2, DVB-S & DVB-DSNG

- Primary or Backhaul Transmission

- Enterprise Data Distribution

- Broadband Interactive Services

- Delivery of Advanced Video and Audio

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Key Features

- Compact: 1RU chassis

- (Optional) 70/140 MHz or L-Band

- Combines multiple data streams into a single carrier

- Data rate range: 1.5 to 155.52 Mbps within 1 to 64 Msps

- QPSK, 8-PSK, 16-QAM, 64-QAM

- Turbo Product Coding (TPC)

- Two data interface slots

- Data interfaces include:

- CDI-10: Dual G.703 Interface

- CDI-50: OC-3 Interface

- CDI-60: HSSI Interface

- CDI-70: 1000 BaseT (GigE) Ethernet Interface

- Adaptive Equalizer

- Unit Management/M&C, Standard Features

- Front Panel Keypad and vacuum florescent display

- Ethernet 10/100 BaseT: SNMP, Telnet or web browser (http) and reflashing

- RS-232 or RS-485

- Asymmetric data rates

- Standard 1.5 ppm internal reference

Typical Users

- Internet Service Providers

- Disaster Recovery Operators

- Circuit Restoration Providers

- Government & Military

Common Applications

- High Data Rates

- Hub Sites

- Point-to-Point & Point-to-Multipoint Environment

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Key Features

- CDM-600: 50 to 90 or 100 to 180 MHz IF range

- CDM-600L: 950 to 1950 MHz IF range

- Fast acquisition demodulator (±32 kHz acquisition range, 64 kbps, Rate 1/2 QPSK: 1 sec average)

- BPSK, QPSK, OQPSK, 8-PSK, 16-QAM modulation types

- Patented 8-QAM for LDPC

- Data rate range from 2.4 kbps to 20 Mbps

- Forward Error Correction choices include Turbo Product Coding (IESS-315 compliant), Viterbi, Sequential, Reed-Solomon, LDPC, and TCM

- Intermediate Data Rate (IDR)

- Intelsat Business Services

- D&I++

- ESC++

- Automatic Uplink Power Control (AUPC)

- Embedded Distant-end Monitor and Control (EDMAC)

- Asymmetric Loop Timing

- CDM-600: 50 or 75Ω, front panel selectable

- CDM-600L: Transmit 50Ω, Receive 50 or 75Ω, female Type N connector

- Open network compatible and backwards compatible with the CDM-500/CDM-550, and CDM-550T

- Interoperable with SDM-300A, SDM-300L3 (CDM‑600L only)

- 1:1 and 1:10 redundancy switch available

Typical Users

- Satellite Service Providers

- Telecom Service Proivders

- Broadcasters

- Offshore

- Enterprise

Common Applications

- Cellular Backhaul

- Satellite News Gathering

- Transmission of Voice, Video & Data

- Point-to-Point & Point-to-Multipoint Environments

- Hub Sites

- Remote Installations

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Price:€ 0.00

Key Features

- Data rate range from 2.4 kbps to 9.98 Mbps

- CDM-570, CDM-570-IP & CDM-570-IPEN: 50 to 90 or 100 to 180 MHz IF range
CDM-570L, CDM-570L-IP & CDM-570L-IPEN: 950 to 2000 MHz IF range

- Standards based management via SNMP, Web, or Telnet

- Symmetric and asymmetric operation for maximum bandwidth efficiency

- Support for mesh, star and hybrid network topologies

- Vipersat Management System (VMS) integration

- G.703 clock extension for IP backhaul

- Fast acquisition demodulator (± 32 kHz acquisition range, 64 kbps, Rate 1/2 QPSK: 150 ms average)

- Modulation types: BPSK, QPSK, OQPSK, 8-PSK, Patented 8-QAM (US Patent 7,254,188), 16 QAM

- Forward Error Correction (FEC) choices include Turbo Product Code (TPC), Viterbi, Reed-Solomon, and TCM

- Automatic Uplink Power Control (AUPC)

- Embedded Distant-end Monitor and Control (EDMAC)

- 1:1 Redundancy available

- CDM-570, CDM-570-IP & CDM-570-IPEN: FSK communications to CSAT-5060 or KST-2000A

- CDM-570L, CDM-570L-IP & CDM-570L-IPEN: 10 MHz reference for BUC, FSK communications and optional BUC power supply

- CDM-570L, CDM-570L-IP & CDM-570L-IPEN: 10 MHz reference and power supply for LNB

- Optional, integrated IP Module with 10/100 BaseT Ethernet port

- Static IP routing for unicast and multicast

- Header and payload compression for maximum efficiency

- IGMP v1 and v2

- VLAN capability with 802.1Q compliant QoS

- Vipersat Management System (VMS) integration

Advanced IP Module Options

Typical Users

- Broadcasters

- Enterprise

- Internet Service Providers

- Satellite Service Providers

- Oil Field Service Providers

- Maritime

Common Applications

- Voice, Video and Data Connectivity over Internet

- LAN/WAN Connectivity (Multiple Sites)

- Satellite News Gathering

- Content Distribution & Contribution

- Ship-to-Shore Communications

- Communications-on-the-Move
  (Land Vehicles/Trains)

- Network Management & Bandwidth-on-Demand (with VMS)

More technical product information can be found on the datasheet. Please use our PDF download option.      

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

PSM-500 Highlights

• New Flexible LDPC with Multiple Block Sizes
• 1.2 kbps to 29.5 Mbps, 1 bps steps
• BPSK/QPSK/OQPSK/8PSK/8QAM/16QAM
• Viterbi, TCM, Reed Solomon, Turbo Product Codes
• Most TPC Code Rates and Block Sizes Available
• Compatible with other Modem Manufacturers
• Ethernet IP Data Interface with Linux based SnIP provides Bridge or Router IP Modes
• Easy Feature Upgrades by Key Codes
• Lowest Latency, <15 ms at 64 kbps ¾ QPSK
• Standard IBS Multiplexer, Async Overhead Channel, AUPC and Remote Modem Control
• Typical acquisition time of 315 ms at 9.6 kbps QPSK, 71 ms at 64 kbps QPSK.
• Tx Output Power Range of 40 dB, +5 to –35 dBm
• Optional Ethernet Remote Control Interface
• Legacy PSM-4900 Compatible
• Built-in 1:1 Redundancy

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

PSM-500L Highlights

• New Flexible LDPC with Multiple Block Sizes
• 1.2 kbps to 29.5 Mbps, 1 bps steps
• BPSK/QPSK/OQPSK/8PSK/8QAM/16QAM
• Standard High Stability 10 MHz Reference
• BUC and LNB Power Options
• Viterbi, TCM, Reed Solomon, Turbo Product Codes
• Most TPC Code Rates and Block Sizes Available
• Compatible with other Modem Manufacturers
• Ethernet IP Data Interface with Linux based SnIP provides Bridge or Router IP Modes
• Lowest Latency, <15 ms at 64 kbps ¾ QPSK
• Standard IBS Multiplexer, Async Overhead Channel, AUPC and Remote Modem Control
• Typical acquisition time of 315 ms at 9.6 kbps QPSK, 71 ms at 64 kbps QPSK.
• Tx Output Power Range of 40 dB, +5 to –35 dBm
• Optional Ethernet Remote Interface
• Legacy PSM-4900 Compatible
• Built-in 1:1 Redundancy

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

PSM-500LT Highlights

• Internal BUC and LNB Power (24Vdc or 48Vdc)
• Standard High Stability 10 MHz Reference
• New Flexible LDPC with Multiple Block Sizes
• 1.2 kbps to 29.5 Mbps, 1 bps steps
• BPSK/QPSK/OQPSK/8PSK/8QAM/16QAM
• Viterbi, TCM, Reed Solomon, Turbo Product Codes
• Most TPC Code Rates and Block Sizes Available
• Compatible with other Modem Manufacturers
• Ethernet IP Data Interface with Linux based SnIP provides Bridge or Router IP Modes
• Lowest Latency, <15 ms at 64 kbps ¾ QPSK
• Standard IBS Multiplexer, Async Overhead Channel, AUPC and Remote Modem Control
• Typical acquisition time of 315 ms at 9.6 kbps QPSK, 71 ms at 64 kbps QPSK.
• Tx Output Power Range of 40 dB, +5 to –35 dBm
• Optional Ethernet Remote Interface
• Legacy PSM-4900 Compatible
• Built-in 1:1 Redundancy (BUC Power & Reference)

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

PSM-500L Highlights

• New Flexible LDPC with Multiple Block Sizes
• 1.2 kbps to 29.5 Mbps, 1 bps steps
• BPSK/QPSK/OQPSK/8PSK/8QAM/16QAM
• Standard High Stability 10 MHz Reference
• BUC and LNB Power Options
• Viterbi, TCM, Reed Solomon, Turbo Product Codes
• Most TPC Code Rates and Block Sizes Available
• Compatible with other Modem Manufacturers
• Ethernet IP Data Interface with Linux based SnIP provides Bridge or Router IP Modes
• Lowest Latency, <15 ms at 64 kbps ¾ QPSK
• Standard IBS Multiplexer, Async Overhead Channel, AUPC and Remote Modem Control
• Typical acquisition time of 315 ms at 9.6 kbps QPSK, 71 ms at 64 kbps QPSK.
• Tx Output Power Range of 40 dB, +5 to –35 dBm
• Optional Ethernet Remote Interface
• Legacy PSM-4900 Compatible
• Built-in 1:1 Redundancy

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Features:

- Combines Advantech powerful DVB-S/S2 modulator and demodulator in a single 1 RU chassis. 

- Powerful Forward Error Correction (FEC) choices compliant with DVB-S, DVB-DSNG, and DVB-S2. The DVB-S2 implementation includes 16APSK/32APSK and both 16k (SHORT) and 64k (NORMAL) FEC Block sizes

- 64QAM support is backed with powerful LDPC BCH implementation (4th generation turbo code) to provide 155Mbps high efficiency link.

- Also supports eTPC Turbo code for lower speed applications (up to 20Mbps).

- Supports standard Viterbi and Reed Solomon.

- Symbol Rates from 32ksps to 45Msps

- Symmetrical or asymmetrical support.

- Modulation and FEC options are all “soft key” controlled allowing simple field upgrades

- Excellent spurious performance

- L Band: 950 to 1750 MHz  IF ranges

- L Band: 950 to 2000 MHz IF ranges

- 70+/-18MHz or 140+/-36MHz IF ranges

- Wide range of Network Interface Cards (NIC):

   - EIA530/RS422

   - HSSI and multi-HSSI interfaces

   - 10/100Mbps Ethernet (IP routing or bridging support)

   - G.703 interfaces

   - Multi G703 interfaces

   - 1GigE  L2 and bridging

   - STM1e support

- 1:1 and 1:10 redundancy switches available.

- Monitoring and control via Ethernet using Web Server, HTTP, Telnet or SNMP, or via terminal mode RS232.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- DVB-S2, DVB-S/DSNG compliant
- QPSK, 8PSK, 16APSK and 32APSK support
- Data Rates in excess of 200Mbps
- Up to 8 ASI inputs for Multi-stream DVB distribution
- L-Band Output
- BISS Scrambling
- Software Upgradable Features
- High granularity roll-off
- Software Defined Radio
- Exceptional RF performance
- ISSY time stamping for SFN compliance
- Null Packet Deletion and Rate Adaption (Bandwidth Saving)
- One solution for all DVB applications

Applications:

The SBM75e is designed to provide best in class performance for critical applications such as:
- Video Contribution
- Digital Satellite News Gathering (DSNG)
- Primary Distribution of Digital Television for Mobile and Terrestrial applications
- Direct To Home

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

PSM-500 Highlights

• New Flexible LDPC with Multiple Block Sizes
• 1.2 kbps to 29.5 Mbps, 1 bps steps
• BPSK/QPSK/OQPSK/8PSK/8QAM/16QAM
• Viterbi, TCM, Reed Solomon, Turbo Product Codes
• Most TPC Code Rates and Block Sizes Available
• Compatible with other Modem Manufacturers
• Ethernet IP Data Interface with Linux based SnIP provides Bridge or Router IP Modes
• Easy Feature Upgrades by Key Codes
• Lowest Latency, <15 ms at 64 kbps ¾ QPSK
• Standard IBS Multiplexer, Async Overhead Channel, AUPC and Remote Modem Control
• Typical acquisition time of 315 ms at 9.6 kbps QPSK, 71 ms at 64 kbps QPSK.
• Tx Output Power Range of 40 dB, +5 to –35 dBm
• Optional Ethernet Remote Control Interface
• Legacy PSM-4900 Compatible
• Built-in 1:1 Redundancy

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Price:€ 0.00

Typical Users

- Government & Military

Common Applications

- Communications at-the-Pause

- Communications on-the-Move

- Flyaway Communications

- Integrated Satellite Terminal Communications

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- Available with 4Mbps and 10Mbps options.

- Turbo FEC 3/4, 7/5, 0.95 Rates

- EIA530 in lieu of 10/100BaseT as standard data interface.

- Concatenated Reed Solomon outer/ Viterbi inner FEC

- Power Supplies and High Stability

- Reference for BUC and LNB

- Optional Front Panel Display and Keypad (as shown)

- 1:1 redundancy solutions available

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- Available with 4Mbps and 10Mbps options.

- Turbo FEC 3/4, 7/5, 0.95 Rates

- EIA530 in lieu of 10/100BaseT as standard data interface.

- Concatenated Reed Solomon outer/ Viterbi inner FEC

- Power Supplies and High Stability

- Reference for BUC and LNB

- Optional Front Panel Display and Keypad (as shown)

- 1:1 redundancy solutions available

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Highlights:

- NEW Turbo Code Option 0.75 to 0.95

- Quad Demodulators in 1U Chassis

- 9.6kbps to 10Mbps in 1bps steps

- Select 70MHz or L Band

- PSU and Reference for LNB

- RS422 serial via RJ45 connector

- Optional Ethernet 10BaseT Interface

- Optional Front LCD Display and Keyboard

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Highlights:

- NEW Turbo Code Option 0.75 to 0.95

- Quad Demodulators in 1U Chassis

- 9.6kbps to 10Mbps in 1bps steps

- Select 70MHz or L Band

- PSU and Reference for LNB

- RS422 serial via RJ45 connector

- Optional Ethernet 10BaseT Interface

- Optional Front LCD Display and Keyboard

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- Available as Modulator or Demodulator only options

- Forward Error Correction (FEC) choices compliant with IESS 308/309/310/315 (Viterbi, Reed-Solomon, Pragmatic Trellis Code Modulation (PTCM) and enhanced Turbo Product Code (eTPC).

- First eTPC Turbo code to 140Mbps (data Rates 16kbps to 140Mbps in 1bps steps)

- Symbol Rates 16ksps to 40Msps

- Software Upgrade (soft key)

- Excellent spurious performance

- L Band: 950 to 1750 MHZ IF ranges

- L Band+: 950 to 2000 Mhz IF ranges

- 70+/-18Mhz or 140+/-36Mhz IF ranges

- Wide range of Network Interface Cards (NIC):
   - EIA530/RS422
   - HSSI
   - 10/100Mbps Ethernet (IP routing orbridging support)
   - G.703 interfaces
   - Multi G703 interfaces
   - Intermediate Data Rate (IDR)
   - Intelsat Business Services (IBS)

- 1:1 and 1:10 redundancy switches available.

- Monitoring and control via Ethernet using Web Server, HTTP, Telnet or SNMP, or via terminal mode RS232.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Highlights:

- MIL-STD-188-165A Compliant

- Available today

- Data Rates 64kbps – 52Mbps in 1bps steps

- Optional eTPC Rates from 0.5 to 0.92

- eTPC Extends data rate to 110Mbps

- BPSK, QPSK, OQPSK, 8PSK & 16QAM

- Modem types A, B, D, E & F

- Intelsat and OM-73 (V)/G scrambling

- Optional DVB-S and DVB-SNG

- Physical Engineering Service Channel

- Software Up-gradable

- Built in BERT

- Clock recovery from input data

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- Combines Advantech powerful DVB-S/S2 modulator and demodulator in a single 1 RU chassis.
- Powerful Forward Error Correction (FEC) choices compliant with DVB-S, DVB-DSNG, and DVB-S2. The DVB-S2 implementation includes 16APSK/32APSK and both 16k (SHORT) and 64k (NORMAL) FEC Block sizes
- 64QAM support is backed with powerful LDPC BCH implementation (4th generation turbo code) to provide  155Mbps high efficiency link.
- Also supports eTPC Turbo code for lower speed applications (up to 20Mbps).
- Supports standard Viterbi and Reed Solomon.
- Symbol Rates from 32ksps to 45Msps
- Symmetrical or asymmetrical support.
- Modulation and FEC options are all “soft key” controlled allowing simple field upgrades
- Excellent spurious performance
- L Band: 950 to 1750 MHZ IF ranges
- L Band: 950 to 2000 Mhz IF ranges
- 70+/-18Mhz or 140+/-36Mhz IF ranges
- Wide range of Network Interface Cards (NIC):
    - EIA530/RS422
    - HSSI and multi-HSSI interfaces
    - 10/100Mbps Ethernet (IP routing or bridging support)
    - G.703 interfaces
    - Multi G703 interfaces
    - 1GigE L2 and bridging
    - STM1e support
- 1:1 and 1:10 redundancy switches available.
- Monitoring and control via Ethernet using Web Server, HTTP, Telnet or SNMP, or via terminal mode RS232.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- DVB-S2 Multi-stream capability using CCM or VCM
- Up to 8 ASI outputs from a single 1RU
- Single or Dual-Carrier operation
- ISSY synchronisation for SFN compliance
- Adaptive Equalizer for signal recovery/distortion compensation
- 10MHz reference Input
- Supports data-rates in excess of 200Mbps
- QPSK, 8PSK, 16APSK and 32APSK support
- Guaranteed interoperability
- Cost effective, bandwidth efficient solution

Applications:

The SBD75e is designed to provide best in class performance for critical applications such as:
- Video Contribution
- Digital Satellite News Gathering (DSNG)
- Primary Distribution of Digital Television for Mobileand Terrestrial applications

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Features:

- Management via 10/100BT with SNMP V3, GUI or RS-232/RS485.
- ISI broadband de-multiplexer (selectively retrieves multiple MPEG-TS from carrier).
- ISSY time stamping for stream synchronization
- Null-packet reinsertion.

Applications:

The Advantech AMT75 is designed to provide best in class performance for critical applications such as:
- Digital Video Broadcast (DVB)
- Digital Satellite News Gathering (DSNG)
- Business enterprise data distribution (ultra high speed IP delivery, e-learning, streaming video and audio)
- Distribution of Digital Terrestrial Transmission

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Key Features

- Symbol Rate: 1 – 63 Msps

- Data Rate: 1 – 169 Mbps

- DVB-S2 ETSI EN 302 307 compliant

- DoubleTalk Carrier-in-Carrier bandwidth compression

- ACM and CCM

- GSE – industry standard encapsulation

- Modulation: QPSK, 8-PSK, 16-APSK, 32-APSK

- Coding: DVB-S2 LDPC/BCH

- Dual IF: 70/140, L-Band and L-Band monitor (standard)

- Data Interfaces

- 2 Gigabit 10/100/1000Base-T Interfaces (standard)

- 1 Optical Gigabit Interface (optional)

- 2 data interface slots (optional) G.703: E3 & T3 (34.368 & 44.768 Mbps)

- Process > 300,000 pps simplex, > 600,000 pps duplex

- Management: HTTP, SNMP, Telnet, RS-232/485

- In-band (over satellite) M&C control

- 1:1 redundancy switching available

Typical Users

- Mobile Operators

- Telecom Operators

- ISPs

- Government & Military

Common Applications

- IP Trunking

- G.703 Trunking

- High-Speed Content Delivery

- Disaster Recovery & Emergency Communications

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Key Features:

- DVB-S2 satellite modem for IP/Ethernet data transmission.

- DVB-S2 compliant (EN 302 307)

- QPSK / 8PSK / 16APSK / 32APSK modulation

- Normal and short FEC frames, pilots on or off

- Physical layer framing (PL descrambling with codes 0..262141) according to DVB-S2 standard

- Symbol rates from 60 ksps to 60 Msps

- OptiACM system (programmable or automatic) for optimized bandwidth usage

- Gigabit Ethernet data interface

- Generic Stream Encapsulation (GSE) direct to DVB-S2 base band frames

- Operates as Layer 2 Bridge, Layer 3 Bridge or Layer 3 Router

- Remote control through RS232, RS422/485 (2-wire or 4-wire) interfaces, TCP/IP over Ethernet, Web browser interface, SNMP (MIBs are provided)

- 10 MHz Reference OCXO included

- Summary alarm output (dual change over switch contacts)

- Operating temperature range 0°C to 50°C (32°F to122°F)

- CE compliant

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Specifications

Intermediate Freq. Band: L-band

Tx Frequency Range: 950-1950 MHz

Rx Frequency Range: 950-1950 MHz

Tuning Step Size: 100 Hz

Min Data Rate, kbps: 4.8 kbps*

Max Data Rate, Mbps: 10 Mbps**

Data Rate Resolution: 1 bps

Symbol Rate Range: Corresponds to data rate range

Modulation Scheme: BPSK,QPSK,OQPSK,8PSK,8QAM,16QAM

Forward Error Correction: Viterbi,Reed-Solomon,Sequential,Trellis (TCM),Turbo (TPC),LDPC

Data Traffic Interface: RS422,X.25,V.35,RS232,G.703,Ethernet IP 10/100 Base-T,Optional: Quad E1

Output Power Level: -5 to -30 dBm variable in 0.1 dB steps

Output Level Stability: ± 0.5 dB over 0-40°C

Occupied Bandwidth: 1.2 x Symbol Rate

Recommended Channel Spacing: 1.4 x Symbol Rate

Amplitude Accuracy: ±0.2 dB

Tx IF Impendance: 50 Ohm

Tx Connector Type: Type N

Tx Return Loss: 14 dB typical

Output Phase Noise: As IESS-308, normally 3dB better

Output Frequency Stability: 4 E-8/yr

Harmonics: < -55 dBc/ 4kHz in band

Output Spurious: < -55 dBc/ 4kHz in band

Phase Accuracy: ±2 ° max

Carrier On/Off Isolation: > 55 dB

Scrambler Types: IBS, V.35, IESS, TPC, RS, ESC

Tx Data Clock Sources: Internal, External, Rx Clock

Internal Stability: ±1 ppm (Standard)

External Reference: Clocking Only: 1-10 MHz in 1 kHz steps; Clocking and RF Frequency: 10 MHz,0 dBm±1 dB

Adaptive Signal Predistorter: Yes

Rx Сarrier Input Range: Minimum level;-130dBm +10 log symbol rate,range 50dB above min,limited to -20dBm max

Maximum Composite Signal: 30 dB above level of desired input up to maximum of -10 dBm

Rx IF Impendance: 50 Ohm

Rx Connector Type: Type N

Rx Return Loss: 14 dB typical

Rx Acquisition Range: Selectable from ± 1 kHz to ± 32 kHz in 1 kHz steps

Acquisition Threshold: <5 dB Es/No QPSK

Acquisition Time: At 9.6kbps,less than 1s at 6dB Es/No.QPSK; At 10 Mbps,less than 100ms at 6dB Es/No.QPSK

Clock Tracking Range: ± 100 ppm minimum

Receive Filtering: Intelsat IESS compliant α = 0.35

Descrambler Types: IBS, V.35, IESS, TPC, RS, ESC

Receive Buffer Size: Selectable in 1ms increments from 0ms to 99ms. Automatically adjusted to slip an integer number of terrestrial multi-frame lengths for framed rates. Buffer storage: Maximum buffer size ? 256kbytes

Rx Data Clock Sources: Internal, External, Tx Input Clock, Receive Clock, Station Reference

AGC Output:  Yes

Paired Carrier Re-use:  Yes

Paired Carrier Specification: Optional: Use with 16QAM to relax HPA backoff by up to 1.6 dB. Compensates for HPA non-linearities

AUPC: Yes. The AUPC requires dedicated use for ESC channel (300 baud)

Framing and Deframing: Closed Network, Closed Network + ESC, IBS/SMS (option) and IDR (option)

ESC/AUX Port: RS-232, RS-422 or RS-485

Drop and Insert: Yes

Ethernet/IP Features: Ethernet IP 10/100 Base-T interface, available in Bridging or Brouting modes (optional)

User Interface: LCD keybord on front panel. Web User Interface available via embedded web server. Includes Receive Spectrum Analyzer,Receive Constellation Monitor,BER Tester and graphing Eb/No,Rx Power,BER plus other parameters,using Internet Explorer. Logged graph data can be sent via email to any email address.

Remote Monitor and Control: For multi-drop applications,RS485 interface. For direct to PC applications,RS232 interface (front panel selectable). M&C port may be directly internally linked to ESC port for "over-the-satellite" M&C without cabling. Ethernet (10/100 BaseT) via RJ45, embedded Web server,SNMP agent V1,V2c and V3

Diagnostics: IF,Interface,Framer,FEC and RS loopbacks;built-in bidirectional BERT;Transmit CW (Pure Carrier);Transmit Alternate 1-0 Pattern;Wideband spectrum analyzer display and constellation display;EZ Audio: 1kHz test tone on audio channels in IDR and P1348 emulation modes

Redundancy : Built in 1:1 redundancy

Power Supply: 100 to 240 VAC,+6%,-10%,1 A @ 100V,0.5 A @ 240 V,47-63 Hz,Fused IEC connector,48 VDC option

BUC Power Supply:

Mains input,+48V DC 2A output (100W) to BUC via Tx IFL
Mains input, +24V DC 4A output (100W) to BUC via Tx IFL
Mains input, +48V DC 3.5A output (180W) to BUC via Tx IFL
Mains input, +24V DC 6A output (180W) to BUC via Tx IFL
+48V DC input, +48V DC 3.5A output (180W) to BUC via Tx IFL
±48V DC input, +24V DC 6A output (180W) to BUC via Tx IFL
±48V DC input, +48V DC 3.5A output (180W) to BUC via Tx IFL
BUC Power Supply is internal

LNB Power: User selectable: +15/24 V 0.5 A DC to LNB via IFL

BUC FSK control: Requires a BUC Power Supply to be fitted. Allows monitor & control of a compatible BUC from the Modem,via the Tx IFL

BUC Reference: 10MHz may be provided via the Tx IFL to the BUC (between 0 & -3dBm) and via the Rx IFL to the LNB (between 0 & +3dBm)

Operating Temperature Range: 0 to 50 C

Operating Relative Humidity: N/D

Size: 1 RU,483 mm(W) x 305 mm(D) x 44.5 mm(H),(19" x 12" x 1.75")

Weight: 3.5 kg (7.7 lbs)

Shipping Weight & Dims: 1 unit box: 8.6 kg (19 lbs),584 mm x 584 mm x 178 mm,(23" x 23" x 7"); 2 unit box: 15.0 kg (33 lbs),584 mm x 584 mm x 330 mm,(23" x 23" x 13")

Notes: * Min data rate @ 1/2 BPSK,** Max data rate depends on activated license

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 290.50

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 332.00