Frequency range: 10.7 - 12.75 GHz

Gain min.: 22 dB

Gain variation max.: +/- 3 dB, +/- 0.3 dB within 30 MHz

Noise figure typical: 5.5 dB

1 dB gain compression point: -8 dBm

3rd order intermodulation: +2 dBm

Input: SMA-connector

Output: SMA-connectors

DC power via separate connector: 12-24V / 40 mA typ

Operating temperature: -30 to +60°C

Dimensions: 129 x 40x 40 mm

Material: Diecast aluminium

Finish: Powder coat

Temperature range: -30° to +60°C

Weight: 200 g

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,301.92

Price:€ 0.00

Terrasat’s 4Way Divider/Combiner provides a simple, compact solution for multicarrier operations. This device is specifically designed for use with Lband modems and the Terrasat IBUC Lband Block Upconverter series. Used as a combiner, the unit combines Lband signals from up to four modulators for use with a single Lband Block Upconverter. As a divider, the device splits a receive signal to feed up to four demodulators. Port number one passes Lband along with DC power, FSK M&C, and 10 MHz reference signals when present. The other three ports pass only Lband avoiding interfering signals from the additional modems. The Combiner/Divider can work in conjunction with the Terrasat IFU which provides the capability to inject DC power and/or 10 MHz reference on to the Lband Coax cable to the IBUC. The Combiner/Divider mounts conveniently at the rear of a standard equipment rack. A choice of connector options is available.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

Price:€ 0.00

FEATURES

- Two BNC ports: one dedicated ASI/SDI output port and one software-selectable ASI/SDI/Genlock input- or second independent output port, with status LED

- All hardware and software features found in the market place, plus more

- Watchdog-controlled input-to-output relais for redundant configurations

- Prepared for genlock

- Cable equalisation and inverted ASI

- Bit-rate measurement and statistics

- Flexible receive modes with time-stamping, packet sequence counting and false-sync pass through for full TR 101 290 support

- SDI Huffman encoding / decoding

- Low- and standard-profile PCI bracket

- PCI rev 2.2, 32 bit, 33 or 66 MHz bus

- Free drivers and DTAPI SDK for Linux, Windows 2k/XP/2k3 and .NET

- Example source code for stream player and stream recorder

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,039.50

Terrasat Installation Kit for mounting high power IBUCs/PSU to antenna boom arms to 3". Includes mounting bracket and additional hardware. Includes bolts to attach to IBUC. Order one kit for each high power IBUC.

Price:€ 131.67

Installation Kit, for mounting IBUC or PSUI to antenna boom arms to 3". Includes mounting bracket and additional hardware. Includes bolts to attach to BUC or PSU. Order one kit for each IBUC and one kit for each Power Supply.

Price:€ 116.08

Frequency range: 10.7 - 12.75 GHz

Gain min.: 28 dB

Gain variation max.: +/- 3 dB, +/- 0.3 dB within 30 MHz

Noise figure typical: 5.5 dB

1 dB gain compression point: 0 dBm

3rd order intermodulation: +10 dBm

Input: SMA-connector

Output: SMA-connector

DC power via separate connector: 12-24V / 40 mA typ

Operating temperature: -30 to +60°C

Dimensions: 129 x 40x 40 mm

Material: Diecast aluminium

Finish: Powder coat

Temperature range: -30° to +60°C

Weight: 200 g

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,301.93

Specifications:

- Input: 50Ω, N-type Connectors (female) / DC Blocking

- Output: 50Ω, N-type Connectors (female) / DC blocking

- Frequency Range: 850-2150 MHz

- Gain: 0dB ±1 dB / Nominal, mean

- Flatness: 850-2150 MHz / ±1.25 dB, any 36MHz band / ±0.5 dB 1 dB

- Compression: +10 dBm

- Noise Figure: 9dB

- Input Return Loss: 18dB / 20dB typical

- Output Return Loss: 12dB / 15dB typical

- LNB Power: none

- 10 MHz Pass: From Output Port 1 to Common / Other ports block 10 MHz

- DC Block Port: 2-16 DC Blocked.

Port 1 to pass DC to common Alarms:

- PSU Dry Contact changeover / LEDs on front

- AC Power: 85-264Vac 50/60Hz / Fused 2A

- PSU Redundancy: Dual / Diode OR Hot Swap PSU: No

- Weight: 8kg

- Dimensions: 2U high x 350mm deep x 19” wide

- Front Panel Colour: Light Grey shade RAL7035

Price:€ 2,354.47

Specifications:

- Input: 50Ω, N-type connectors (female) / DC blocked

- Output: 50Ω, N-type connectors (female) / DC blocked

- Frequency Range: 850-2150 MHz

- Gain: 0dB ±1 dB / Nominal, mean

- Frequency Response: ±1.5 dB / Full band, ±0.4 dB / over any 36 MHz

- Isolation: 25dB 1 dB Gain Compression Point: 0 dBm / Output

- Noise Figure: 7dB

- Input Return Loss: 12dB typical

- Output Return Loss: 12dB typical

- LNB Power: Yes / Switchable 18V

- AC Power: 85-264Vac 50/60Hz

- PSU Redundancy: Dual / Diode OR Hot Swap PSU: No

- 10MHz Pass: Yes / From port one to the Common Port

- Alarms: Dry contact / LEDs at front panel.

Connectors at rear panel:

- Weight: 8kg

- Dimensions: 2U high x 350mm deep x 19” wide

- Front Panel Colour: Light Grey shade RAL7035

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 2,166.06

To be used with Ipricot S1200 DVB-S/S2 Satellite IP Router Receiver.

Price:€ 76.23

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 269.50

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

The Comtech EF Data (CEFD) CiM-25 provides a complete IP interface supporting web server (HTTP), SNMP, and Telnet interfaces. The web server interface allows the operator to setup and control the equipment via a standard web browser (Internet Explorer 5.x or Netscape Navigator 4.x minimum versions). The SNMP interface is available for customers who prefer to use the framework provided via this standard protocol. The Telnet interface is provided for customers who have already invested in a PC-based M&C application, but prefer an Ethernet backbone to the standard RS-232 or RS-422 serial interfaces.

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 308.00

Terrasat’s Indoor IBUC Power Supplies run on AC mains power and provide 48 VDC power to the IBUC through a multi‐conductor 16 AWG cable. The units are packaged in rack‐mountable chassis with internal cooling fans.

The Indoor Power Supplies provide 48VDC power for Terrasat IBUC’s through 125W C-band, 125W X‐band, and 80W Ku‐band.

These efficient and cost effective power supplies are ideal for SNG vehicles, mobile terminals and other applications where a short cable run and mounting inside the vehicle, shelter or transit case is the preferred configuration.

Installed in a standard 19‐inch rack, the Indoor Power Supplies occupy only one rack unit (1.75”) of rack space and are powered from AC mains.

Simple, plug‐and‐play installation requires no on‐site configuration.

The DC output connector is a circular MS‐type compatible.

Electrical:

- Nominal output voltage (DC): 48V

- Output regulation: 6%

- Output rated current: 12.6 Amp

- Output ripple and noise (p-p): 1% peak-to-peak

- DC output power, nominal: 600W

- Efficiency: 88% min. at 600W, 230VAC

- Input voltage range: 90-264 VAC

- Input frequency: 47-63 Hz

- AC current: 8.4A rms @ 90VAC and 600W load

- Power Factor, per EN6100-3-2: 0.97 W/VA

- Inrush current: 20A peak @ Vin = 230VAC, 25°C

- Input leakage current, per EN 60950: <3.5mA @ 240VAC

- Output connector: ACS 02E14S-6S (553)

Environmental:

- Operating temperature: 0 to 50°C

- Humidity: 95% RH (non-condensing)

Mechanical:

- Weight: 8 lbs. (3.7 kg)

- Dimensions: 19(w) x 8.5(d) x 1.75(h) inches (483 x 216 x 45 mm)

- Applications: C-band through 50W, X-band through 50W, Ku-band through 40W

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,350.58

Terrasat’s Outdoor BUC Power Supplies run on AC mains power and provide 48 VDC power to the IBUC through a multi‐conductor 16 AWG cable. The unit is packaged in an environmentally protected outdoor enclosure. The form factor is compatible with Terrasat’s universal mounting bracket.

Terrasat provides the detachable AC input connector, an Amphenol C01620 D003 110 12. The DC output connector type is a circular MS‐type compatible. Terrasat provides a connectorized 5‐foot (1.5m) DC cable to go between the PSUI and the IBUC.

Electrical:

- DC output voltage: 50V

- Output volt. tolerance: ± 4%

- Output rated current, nom.: 20 Amp (1000W)

- Output ripple & noise: ±2.0 V

- DC output power, nom.: 1000W

- Efficiency: 89% at 1000W, 220VAC 86% at 1000W, 120VAC

- Input voltage range: 100-240 VAC

- Input Frequency: 47-63 Hz

- AC current: 9.7A rms @ 120VAC and 1000W load

- Power factor: >0.95@120VAC/220VAC, 1000W

- Inrush current: 20A

- Input leakage current: <2.5mA@240V, 63Hz

- Output connector: Amphenol ACS 02E14S-6S (553)

- AC Input Connector: Amphenol C01620 C003 100 12

Environmental:

- Operating temperature: -40 to +55°C

- Humidity: 100%

Mechanical:

- Weight: 10 lbs. (4.5kg)

- Dimensions: 12.2 x 7.2 x 6.0 in. (310 x 183 x 152 mm)

- Applications: C-band 100W-125W, Ku-Band 60W-80W, X-band 100W-125W

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 2,530.99

Terrasat’s Outdoor BUC Power Supplies run on AC mains power and provide 48 VDC power to the IBUC through a multi‐conductor 16 AWG cable. The unit is packaged in an environmentally protected outdoor enclosure. The form factor is compatible with Terrasat’s universal mounting bracket.

Terrasat provides the detachable AC input connector, an Amphenol C01620 D003 110 12. The DC output connector type is a circular MS‐type compatible. Terrasat provides a connectorized 5‐foot (1.5m) DC cable to go between the PSUI and the IBUC.

Electrical:

- DC output voltage: 49V

- Output volt. tolerance: ± 4%

- Output rated current, nom.: 25 Amp (1200W)

- Output ripple & noise: ±2.0 V

- DC output power, nom.: 1200W

- Efficiency: 89% at 1200W, 220VAC

- Input voltage range: 200-240 VAC

- Input Frequency: 47-63 Hz

- AC current: 6.0A rms @ 220VAC and 1200W load

- Power factor: >0.95@220VAC,1200W

- Inrush current: 30A

- Input leakage current: <2.5mA@240V, 63Hz

- Output connector: Amphenol ACS 02E14S-6S (553)

- AC Input Connector: Amphenol C01620 C003 100 12

Environmental:

- Operating temperature: -40 to +55°C

- Humidity: 100%

Mechanical:

- Weight: 10 lbs. (4.5kg)

- Dimensions: 12.2 x 7.2 x 6.0 in. (310 x 183 x 152 mm)

- Applications: C-band 150W-200W, X-band 150W-200W

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 2,530.99

Terrasat’s Indoor IBUC Power Supplies run on AC mains power and provide 48 VDC power to the IBUC through a multi‐conductor 16 AWG cable. The units are packaged in rack‐mountable chassis with internal cooling fans.

The Indoor Power Supplies provide 48VDC power for Terrasat IBUC’s through 125W C-band, 125W X‐band, and 80W Ku‐band.

These efficient and cost effective power supplies are ideal for SNG vehicles, mobile terminals and other applications where a short cable run and mounting inside the vehicle, shelter or transit case is the preferred configuration.

Installed in a standard 19‐inch rack, the Indoor Power Supplies occupy only one rack unit (1.75”) of rack space and are powered from AC mains.

Simple, plug‐and‐play installation requires no on‐site configuration.

The DC output connector is a circular MS‐type compatible.

Electrical:

- Nominal output voltage (DC): 48V

- Output regulation: 6%

- Output rated current: 21 Amp

- Output ripple and noise (p-p): 1% peak-to-peak

- DC output power, nominal: 1000W

- Efficiency: 88% min. at 1000W, 230VAC

- Input voltage range: 90-264 VAC

- Input frequency: 47-63 Hz

- AC current: 14A rms @ 90VAC and 1000W load

- Power Factor, per EN6100-3-2: 0.97 W/VA

- Inrush current: 34A peak @ Vin = 230VAC, 25°C

- Input leakage current, per EN 60950: <3.5mA @ 240VAC

- Output connector: ACS 02E14S-6S (553)

Environmental:

- Operating temperature: 0 to 50°C

- Humidity: 95% RH (non-condensing)

Mechanical:

- Weight: 8 lbs. (3.7 kg)

- Dimensions: 19(w) x 8.5(d) x 1.75(h) inches (483 x 216 x 45 mm)

- Applications: C-band 60W through 125W, X-band 60W through 125W, Ku-band 50W through 80W

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,570.03

Terrasat’s Outdoor BUC Power Supplies run on AC mains power and provide 48 VDC power to the IBUC through a multi‐conductor 16 AWG cable. The unit is packaged in an environmentally protected outdoor enclosure. The form factor is compatible with Terrasat’s universal mounting bracket.

Terrasat provides the detachable AC input connector, an Amphenol C01620 D003 110 12. The DC output connector type is a circular MS‐type compatible. Terrasat provides a connectorized 5‐foot (1.5m) DC cable to go between the PSUI and the IBUC.

Electrical:

- DC output voltage: 48V

- Output volt. tolerance: ± 3%

- Output rated current, nom.: 12.5 Amp (600W)

- Output ripple & noise: ±0.6 V

- DC output power, nom.: 600W

- Efficiency: 87% at 600W, 240VAC 82% at 600W, 120VAC

- Input voltage range: 100-240 VAC

- Input Frequency: 47-63 Hz

- AC current: 6A rms @ 120VAC and 600W load

- Power factor: >0.90@120VAC,600W >0.95@240VAC,600W

- Inrush current: 10A

- Input leakage current: <2.5mA@240V, 63Hz

- Output connector: Amphenol ACS 02E14S-6S (553)

- AC Input Connector: Amphenol C01620 C003 100 12

Environmental:

- Operating temperature: -40 to +60°C

- Humidity: 100%

Mechanical:

- Weight: 9 lbs. (4.1kg)

- Dimensions: 12.2 x 7.2 x 6.0 in. (310 x 183 x 152 mm)

- Applications: C-band to 80W, Ku-Band to 50W, X-band to 80W

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,630.86

Terrasat’s Outdoor BUC Power Supplies run on AC mains power and provide 48 VDC power to the IBUC through a multi‐conductor 16 AWG cable. The unit is packaged in an environmentally protected outdoor enclosure. The form factor is compatible with Terrasat’s universal mounting bracket.

Terrasat provides the detachable AC input connector, an Amphenol C01620 D003 110 12. The DC output connector type is a circular MS‐type compatible. Terrasat provides a connectorized 5‐foot (1.5m) DC cable to go between the PSUI and the IBUC.

Electrical:

- DC output voltage: 48V

- Output volt. tolerance: ± 3%

- Output rated current, nom.: 5.2 Amp (250W)

- Output ripple & noise: ±0.6 V

- DC output power, nom.: 250W

- Efficiency: 89% at 250W, 240VAC 86% at 250W, 120VAC

- Input voltage range: 100-240 VAC

- Input Frequency: 47-63 Hz

- AC current: 2.5A rms @ 120VAC and 250W load

- Power factor: >0.95@120VAC,250W >0.90@240VAC,250W

- Inrush current: 5A

- Input leakage current: <3.5mA@240V, 63Hz

- Output connector: Amphenol ACS 02E14S-6S (553)

- AC Input Connector: Amphenol C01620 C003 100 12

Environmental:

- Operating temperature: -40 to +60°C

- Humidity: 100%

Mechanical:

- Weight: 10 lbs. (4.5kg)

- Dimensions: 12.2 x 7.2 x 6.0 in. (310 x 183 x 152 mm)

- Applications: C-band to 25W, Ku-Band to 16W, X-band to 25W

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 1,068.76