<![CDATA[LNB, Low Noise Block]]> http://www.all4sat.com/index.php/lnbs-low-noise-block.html Sun, 01 Aug 2010 07:52:38 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[Satellite Systems Corporation (SSC) C-Band LNB 4003 (Configurator)]]> http://www.all4sat.com/index.php/satellite-systems-corporation-ssc-c-band-lnb-low-noise-block-4003.html

Specifications:

Input Frequency to External LNB (Low Noise Block): 3.4 - 4.2 GHz

IF Output Frequency: 950 to 1750 MHz, Inverted

Gain: 55 db min, 70 db max

Level Stability: 1 dB p-p Max, 27 MHz segment

1 Db compression point: +9 dBm min

Noise Temperature: 20 K or 30 K

Image Rejection: 45 dB min

Local Oscillator Frequency: 5.150 GHz

Local Oscillator Stability: ±5 or ±10 kHz

Local Oscillator Phase Noise: -75 dBc/Hz @ 1 kHz

Local Oscillator Leakage: -45 dBm max, measured at Waveguide input

Input Connector: CPR229G Waveguide

Output Connector: Type F, Female, 75 ohm

Dimensions: 7.1" x 4.0" x 2.8"

Weight: 25 oz

Operating Temperature: - 30 to +55 C

Relative Humidity: up to 100 % condensation and Frost

Power: +15 to 24 VDC, supplied on center conductor of IF cable

Current Draw: 350 ma, typical

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Satellite Systems Corporation (SSC) Ku-Band LNB 4007 (Configurator)]]> http://www.all4sat.com/index.php/satellite-systems-corporation-ssc-ku-band-lnb-low-noise-block-4007.html

Specifications:

Input Frequency to LNB (Low Noise Block): 11.7 - 12.2 GHz, 12.2 - 12.75 GHz or 10.95 - 11.7 GHz

IF Output Frequency: 950 to 1450 MHz, 900 to 1450 MHz or 950 to 1700 MHz

Gain: 55 dB min, 70 dB max

Gain Variation: 3 dB p-p typical, 4 dB p-p max

Gain Ripple: 1 dB p-p max, 27 MHz segment

1 dB compression point: +7 dBm min

Noise Figure: 1.2

Image Rejection: 55 dB typical, 45 dB min

3rd Order Intercept Point: +10 dBm min

Local Oscillator Frequency: 10.75 GHz, 11.3 GHz or 10 GHz

Local Oscillator Stability: ±10 kHz

Local Oscillator Phase Noise: -75 dBc/Hz @ 1 kHz

Local Oscillator Leakage: -45 dBm max, measured at Waveguide input

Input Connector: WR-75 Waveguide

Output Connector: Type F, Female, 75 ohm

Dimensions: 3.78" x 1.66" x 1.66"

Weight: 18 oz

Operating Temperature: - 40 to +60 C

Relative Humidity: up to 100 % condensation and Frost

Power: +15 to 24 VDC, supplied on center conductor of IF cable

Current Draw: 350 mA typical, 500 mA max

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1000HE (Configurator)]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-low-noise-block-1000he.html

Specifications:

- Input frequency: 10.95 to 12.75 GHz
- L.O. frequency: 10.00 GHz
- Output frequency: 950 to 2750 MHz
- Noise figure: 0.8 dB
- L.O. stability: ±25 kHz or ±10 kHz
- Phase noise: -70 dBc/Hz at 1kHz, -80 dBc/Hz at 10kHz or -90 dBc/Hz at 100kHz
- Input VSWR: 2.5 : 1
- Output VSWR: 2.2 : 1
- Conversion gain: 55 dB
- Output: P1dB 5 dBm
- Power requirements: +12 to +24 V supplied through center conductor of IF cable
- Current drain: 300 mA
- Input Waveguide: WR75
- Dimensions: 130 (L) x 60 (W) x 42 (H) mm (5.1 x 2.4 x 1.7 in)
- Weight: 300g / 10.6 oz

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) Dual Output PLL LNB (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-dual-output-pll-lnb-low-noise-block.html

Standard frequency range low band: 10.7 - 11.8 / 10.95 - 12.1 / 11.2 - 11.7 / 11.45 - 11.95 / 11.7 - 12.25 GHz
Standard frequency range high band: 11.7 - 12.75 / 12.2 - 12.75 / 12.25 - 12.75 GHz
Standard LO frequency low band: 9.75, 10.0, 10.25, 10.5, 10.6 and 10.75 GHz
Standard LO frequency high band: 10.6, 10.75, 11.2, 11.25 and 11.3 GHz
Output frequency: Depends on Frequency range and LO
Noise figure, typical: 1.0 dB
Spurious signals: -60 dBm typ. at the first spurious (e.g. 850 MHz with LO 9.75 & 10.6 GHz)
Gain typ.: 60 dB (55 dB min.)
Gain variation typ: ±4 dB within each band, ±0.4 dB within 30 MHz
LO stability: ±10 kHz* or ±25 kHz, ext. 10 MHz reference (External reference input power -5 to +10 dBm)
LO Phase noise typ.: -75 dBc @ 1 kHz, -85 dBc @ 5 kHz, -85 dBc @ 10 kHz, -100 dBc @ 100 kHz, -120 dBc @ >1 MHz
LO radiation: -60 dBm
Image rejection: 40 dB min.
1 dB gain compression point: +15 dBm
IP3: +25 dBm
DC power LNA (sep.): 12-24 V / 40 mA typ
DC power for each BDC: 12-24 V / 280 mA typ
Operating temperature: -40 to +80°C
Storage temperature: -40 to +80°C
Input flange LNA: WR-75 waveguide
Output LNA (waterproof): SMA-connectors
Input BDC (waterproof): SMA-connector
Output connector BDC (waterproof): F-connector 75 ohm or N-connector 50 ohm
Input VSWR: 2.3:1 max
Output VSWR: 2.0:1 max
Weight and dimension LNA: 124 g, 81 x 40x 40 mm
Weight and dimension BDC: 174.3 (N 179.3 mm) x 60 x 48.8 mm

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) 2-Band Full Ku-Band PLL LNB (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-2-band-full-ku-band-pll-lnb-low-noise-block.html

Specification SMW Q-PLL

 

 Standard LO frequency (max. 4)

  9.75, 10.0, 10.25, 10.5, 10.6, 10.75, 11.2, 11.25 and 11.3 GHz
 Standard IF Frequency  950-1450 to 2150 MHz (will be specified from the LO's

  choosen)

   
 Specification Internal reference  
   
 LO stability (over temp.)   ±10* or ±25 kHz
 LO Phase noise typ.   -75 dBc @ 1 kHz
   -78 dBc @ 10 kHz
   -100 dBc @ 100 kHz
   -120 dBc @ >1 MHz
   
 Switching 2-band  via Voltage (V)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 16.0 - 19.0 V, No Tone
   
 Switching 2-band  via Tone (T)  Band 1 No Tone, 11.5 - 20.0 V
   Band 2 Tone 22 kHz, 11.5 - 20.0 V
   
 Switching 3-band  via Voltage (V)  Band 1 11.5 - 13.7 V, No Tone (option 13 V) 
   Band 2 13.9 - 16.8 V, No Tone (option 18 V)
   Band 3 17.0 - 19.0 V, No Tone (option 24 V)
   
 Switching 3-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   
 Switching 4-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   Band 4 16.0 - 19.0 V, Tone 22 kHz
   
   
 Specification External 10 MHz reference  
   
 LO stability (over temp.)  Depends on the external reference
 External reference input frequency  10 MHz
 External reference input power  -5 to +10 dBm
 External reference input port  Output IF connector
   Option via sep. connector (F, N or SMA) 
 LO Phase noise typ.   -70 dBc @ 10 Hz
   -70 dBc @ 100 Hz
   -75 dBc @ 1 kHz
   -78 dBc @ 10 kHz
    -105 dBc @ 100 kHz
 External Reference Phase noise   -135 dBc @ 100 Hz
   -143 dBc @ 1 kHz
   -145 dBc @ 10 kHz
   
 Switching 2-band  via Voltage (V)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 16.0 - 19.0 V, No Tone
   
 Switching 2-band  via Tone (T)  Band 1 No Tone, 11.5 - 20.0 V
 (ext. 10 MHz ref. via sep. input connector)  Band 2 Tone 22 kHz, 11.5 - 20.0 V
   
 Switching 3-band  via Voltage (V)  Band 1 11.5 - 13.7 V, No Tone (option 13 V)
   Band 2 13.9 - 16.8 V, No Tone (option 18 V)
   Band 3 17.0 - 19.0 V, No Tone (option 24 V)
   
 Switching 3-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
 (ext. 10 MHz ref. via sep. input connector)  Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   
 Switching 4-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
 (ext. 10 MHz ref. via sep. input connector)  Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   Band 4 16.0 - 19.0 V, Tone 22 kHz
   
 General specification  
   
 Gain typ.  58 dB (53 dB min.)
 Gain variation within 30 MHz max.  ±0.4 dB
 Gain variation max.  ±4 dB
 Noise Figure typ.   0.8 dB
 LO radiation  -60 dBm
 Image rejection  40 dB min
  1 dB gain compression point typ.  +15 dBm
 IP3 typ.  +25 dBm
 Input  WR-75 waveguide (R120)
 Output, waterproof  F-connector 75 ohm
   N-connector 50 ohm or
   SMA-connector 50 ohm
 Input VSWR  2.3:1 max
 Output VSWR  2.1:1 max
 Current  270 mA typ.
 Operating temperature  -30 to +60°C
 Storage temperature  -40 to +80°C
 Dimensions  122mm (127mm N-connector) x 56mm x 44 mm
 Weight  329 g (F- & SMA-connector)
   345 g (N-connector)
   
 Specification Tone Switching  
   
 Switching  No tone / 22 kHz ±4 kHz
 Amplitude voltage  0.6 ±0.2 V
 Duty cycle  40-60%
   
 Options  Voltage switching 13/18/24 V (240/190/150 mA typ.)
   Separate DC power input (F, N or SMA)
   Customized gain and variation
   Customized LOs
   Extended frequency range
   Separate input connector for the ext. 10 MHz ref.
   SMA-input (via transition)
   

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) 3-Band Full Ku-Band PLL LNB (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-3-band-full-ku-band-pll-lnb-low-noise-block.html

Specification SMW Q-PLL

 

 Standard LO frequency (max. 4)

  9.75, 10.0, 10.25, 10.5, 10.6, 10.75, 11.2, 11.25 and 11.3 GHz
 Standard IF Frequency  950-1450 to 2150 MHz (will be specified from the LO's

  choosen)

   
 Specification Internal reference  
   
 LO stability (over temp.)   ±10* or ±25 kHz
 LO Phase noise typ.   -75 dBc @ 1 kHz
   -78 dBc @ 10 kHz
   -100 dBc @ 100 kHz
   -120 dBc @ >1 MHz
   
 Switching 2-band  via Voltage (V)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 16.0 - 19.0 V, No Tone
   
 Switching 2-band  via Tone (T)  Band 1 No Tone, 11.5 - 20.0 V
   Band 2 Tone 22 kHz, 11.5 - 20.0 V
   
 Switching 3-band  via Voltage (V)  Band 1 11.5 - 13.7 V, No Tone (option 13 V) 
   Band 2 13.9 - 16.8 V, No Tone (option 18 V)
   Band 3 17.0 - 19.0 V, No Tone (option 24 V)
   
 Switching 3-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   
 Switching 4-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   Band 4 16.0 - 19.0 V, Tone 22 kHz
   
   
 Specification External 10 MHz reference  
   
 LO stability (over temp.)  Depends on the external reference
 External reference input frequency  10 MHz
 External reference input power  -5 to +10 dBm
 External reference input port  Output IF connector
   Option via sep. connector (F, N or SMA) 
 LO Phase noise typ.   -70 dBc @ 10 Hz
   -70 dBc @ 100 Hz
   -75 dBc @ 1 kHz
   -78 dBc @ 10 kHz
    -105 dBc @ 100 kHz
 External Reference Phase noise   -135 dBc @ 100 Hz
   -143 dBc @ 1 kHz
   -145 dBc @ 10 kHz
   
 Switching 2-band  via Voltage (V)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 16.0 - 19.0 V, No Tone
   
 Switching 2-band  via Tone (T)  Band 1 No Tone, 11.5 - 20.0 V
 (ext. 10 MHz ref. via sep. input connector)  Band 2 Tone 22 kHz, 11.5 - 20.0 V
   
 Switching 3-band  via Voltage (V)  Band 1 11.5 - 13.7 V, No Tone (option 13 V)
   Band 2 13.9 - 16.8 V, No Tone (option 18 V)
   Band 3 17.0 - 19.0 V, No Tone (option 24 V)
   
 Switching 3-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
 (ext. 10 MHz ref. via sep. input connector)  Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   
 Switching 4-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
 (ext. 10 MHz ref. via sep. input connector)  Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   Band 4 16.0 - 19.0 V, Tone 22 kHz
   
 General specification  
   
 Gain typ.  58 dB (53 dB min.)
 Gain variation within 30 MHz max.  ±0.4 dB
 Gain variation max.  ±4 dB
 Noise Figure typ.   0.8 dB
 LO radiation  -60 dBm
 Image rejection  40 dB min
  1 dB gain compression point typ.  +15 dBm
 IP3 typ.  +25 dBm
 Input  WR-75 waveguide (R120)
 Output, waterproof  F-connector 75 ohm
   N-connector 50 ohm or
   SMA-connector 50 ohm
 Input VSWR  2.3:1 max
 Output VSWR  2.1:1 max
 Current  270 mA typ.
 Operating temperature  -30 to +60°C
 Storage temperature  -40 to +80°C
 Dimensions  122mm (127mm N-connector) x 56mm x 44 mm
 Weight  329 g (F- & SMA-connector)
   345 g (N-connector)
   
 Specification Tone Switching  
   
 Switching  No tone / 22 kHz ±4 kHz
 Amplitude voltage  0.6 ±0.2 V
 Duty cycle  40-60%
   
 Options  Voltage switching 13/18/24 V (240/190/150 mA typ.)
   Separate DC power input (F, N or SMA)
   Customized gain and variation
   Customized LOs
   Extended frequency range
   Separate input connector for the ext. 10 MHz ref.
   SMA-input (via transition)
   

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) 4-Band Full Ku-Band PLL LNB (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-4-band-full-ku-band-pll-lnb-low-noise-block.html

Specification SMW Q-PLL

 

 Standard LO frequency (max. 4)

  9.75, 10.0, 10.25, 10.5, 10.6, 10.75, 11.2, 11.25 and 11.3 GHz
 Standard IF Frequency  950-1450 to 2150 MHz (will be specified from the LO's

  choosen)

   
 Specification Internal reference  
   
 LO stability (over temp.)   ±10* or ±25 kHz
 LO Phase noise typ.   -75 dBc @ 1 kHz
   -78 dBc @ 10 kHz
   -100 dBc @ 100 kHz
   -120 dBc @ >1 MHz
   
 Switching 2-band  via Voltage (V)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 16.0 - 19.0 V, No Tone
   
 Switching 2-band  via Tone (T)  Band 1 No Tone, 11.5 - 20.0 V
   Band 2 Tone 22 kHz, 11.5 - 20.0 V
   
 Switching 3-band  via Voltage (V)  Band 1 11.5 - 13.7 V, No Tone (option 13 V) 
   Band 2 13.9 - 16.8 V, No Tone (option 18 V)
   Band 3 17.0 - 19.0 V, No Tone (option 24 V)
   
 Switching 3-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   
 Switching 4-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   Band 4 16.0 - 19.0 V, Tone 22 kHz
   
   
 Specification External 10 MHz reference  
   
 LO stability (over temp.)  Depends on the external reference
 External reference input frequency  10 MHz
 External reference input power  -5 to +10 dBm
 External reference input port  Output IF connector
   Option via sep. connector (F, N or SMA) 
 LO Phase noise typ.   -70 dBc @ 10 Hz
   -70 dBc @ 100 Hz
   -75 dBc @ 1 kHz
   -78 dBc @ 10 kHz
    -105 dBc @ 100 kHz
 External Reference Phase noise   -135 dBc @ 100 Hz
   -143 dBc @ 1 kHz
   -145 dBc @ 10 kHz
   
 Switching 2-band  via Voltage (V)  Band 1 11.5 - 14.0 V, No Tone
   Band 2 16.0 - 19.0 V, No Tone
   
 Switching 2-band  via Tone (T)  Band 1 No Tone, 11.5 - 20.0 V
 (ext. 10 MHz ref. via sep. input connector)  Band 2 Tone 22 kHz, 11.5 - 20.0 V
   
 Switching 3-band  via Voltage (V)  Band 1 11.5 - 13.7 V, No Tone (option 13 V)
   Band 2 13.9 - 16.8 V, No Tone (option 18 V)
   Band 3 17.0 - 19.0 V, No Tone (option 24 V)
   
 Switching 3-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
 (ext. 10 MHz ref. via sep. input connector)  Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   
 Switching 4-band  via Voltage (V) and Tone (T)  Band 1 11.5 - 14.0 V, No Tone
 (ext. 10 MHz ref. via sep. input connector)  Band 2 11.5 - 14.0 V, Tone 22 kHz
   Band 3 16.0 - 19.0 V, No Tone
   Band 4 16.0 - 19.0 V, Tone 22 kHz
   
 General specification  
   
 Gain typ.  58 dB (53 dB min.)
 Gain variation within 30 MHz max.  ±0.4 dB
 Gain variation max.  ±4 dB
 Noise Figure typ.   0.8 dB
 LO radiation  -60 dBm
 Image rejection  40 dB min
  1 dB gain compression point typ.  +15 dBm
 IP3 typ.  +25 dBm
 Input  WR-75 waveguide (R120)
 Output, waterproof  F-connector 75 ohm
   N-connector 50 ohm or
   SMA-connector 50 ohm
 Input VSWR  2.3:1 max
 Output VSWR  2.1:1 max
 Current  270 mA typ.
 Operating temperature  -30 to +60°C
 Storage temperature  -40 to +80°C
 Dimensions  122mm (127mm N-connector) x 56mm x 44 mm
 Weight  329 g (F- & SMA-connector)
   345 g (N-connector)
   
 Specification Tone Switching  
   
 Switching  No tone / 22 kHz ±4 kHz
 Amplitude voltage  0.6 ±0.2 V
 Duty cycle  40-60%
   
 Options  Voltage switching 13/18/24 V (240/190/150 mA typ.)
   Separate DC power input (F, N or SMA)
   Customized gain and variation
   Customized LOs
   Extended frequency range
   Separate input connector for the ext. 10 MHz ref.
   SMA-input (via transition)
   

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) PLL-LNB with High IP3 +25 dBm (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-pll-lnb-low-noise-block-with-high-stability-ip3.html

General Specification

 

 LO Stability*  ±10 or ±25kHz
 Gain typ.  select between 54 and 60 dB (55 db min.)
 Gain variation  ±4 dB within the band
   ±0.4 dB within 30 MHz
 Noise Figure typ.  0.8 dB
 LO Phase noise typ.    -75 dBc @ 1 kHz
   -80 dBc @ 5 kHz
   -85 dBc @ 10 kHz
   -100 dBc @ 100 kHz
   -120 dBc @ >1 MHz
 LO radiation   -60 dBm
 Image rejection  30 dB min
 1 dB gain compression point  +15 dBm
 IP3  +25 dBm typ
 Input  WR-75 waveguide (R120)
 Output (waterproof)   F-connector 75 ohm or N-connector 50 ohm
 Input VSWR  2.3:1 max
 Output VSWR  2.1:1 max
 DC power  12 - 24 V, 270 mA typ.
 Operating temperature  -40 to +80°C
 Storage temperature    -40 to +80°C
 Dimensions  122 (127 N) x 56 x 44 mm
 Weight

 329 g (F-connector)

 345 g (N-connector)

 

 Options

 Customized gain and variation

 Sep. DC power input

 Customized LO frequency

 SMA output connector (waterproof)

 Extended frequency range e.g. LO 11.3 with 12.25 - 13.25 GHz

 Enclosed accessories  O-ring

 Screw M4 x 8 4 pcs

 

* ±10 kHz within -10° to +70°C

   ±25 kHz within -40° to +60°C

 

General Specification SMW PLL ext. 10 MHz ref.

 

 LO stability (over temp.)  Depends on external reference
 External reference input frequency  10 MHz
 Gain typ.  60 dB (55 dB min.)
 Gain variation within 30 MHz. Max.   ±0.4 dB
 Gain variation max.  ±4 dB
 Noise Figure typ.  0.8 dB
 LO Phase noise typical  -70 dBc @ 10 Hz
   -70 dBc @ 100 Hz
   -75 dBc @ 1 kHz
   -85 dBc @ 10 kHz
   -100 dBc @ 100 kHz
 External Reference Phase noise  -130 dBc @ 10 Hz
   -135 dBc @ 100 Hz
   -143 dBc @ 1 kHz
   -145 dBc @ 10 kHz
   -160 dBc @ 100 kHz
 LO radiation  -60 dBm
 Image rejection  40 dB min
 1 dB gain compression point  +15 dBm
 IP 3  +25 dBm
 Input  WR-75 waveguide (R120)
 External reference input power  -5 to +10 dBm
 External reference input port  Output IF connector. Option: Sep. connector (F, N or SMA)
 Output (waterproof)  F-connector 75 ohm,

 N-connector 50 ohm or

 SMA-connector 50 ohm

 Input VSWR  2.3:1 max
 Output VSWR  2.1:1 max
 DC power  12 - 24 V, 270 mA typ.
 Operating temperature  -40 to +80°C
 Storage temperature  -40 to +80°C
 Dimensions  122 (127 N) x 56 x 44 mm
 Weight  329 g (F- & SMA-connector)

 345 g (N-connector)

   
Options  10 MHz ref. via separate input connector (F, N or SMA) 

 Separate DC power input (F, N or SMA)

 Customized gain and variation

 Customized LO

 SMA-input

 Extended frequency range

   
 Attached accessories  O-ring

 Screw M4 x 8 4 pcs

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) PLL-LNB High Stability (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-pll-lnb-low-noise-block-high-stability.html

Typical Specification:

 

 LO Stability*  ±10, ±25, ±100, ±150 or ±250 kHz 
 Gain typ.  select between 54 and 60 dB
 Gain variation  ±4 dB within the band
   ±0.4 dB within 30 MHz
 Noise Figure typ.  0.8 dB
 LO Phase noise typical   -75 dBc @ 1 kHz
   -80 dBc @ 5 kHz
   -85 dBc @ 10 kHz
   -100 dBc @ 100 kHz
   -120 dBc @ >1 MHz
 LO radiation   -60 dBm
 Image rejection  40 dB min
 1 dB gain compression point  +5 dBm
 IP3  +15 dBm
 Input  WR-75 waveguide (R120)
 Output (waterproof)    F-connector 75 ohm or N-connector 50 ohm
 Input VSWR  2.3:1 max
 Output VSWR  2.1:1 max
 DC power  12 - 24 V, 270 mA typ.
 Operating temperature  -40 to +80°C
 Storage temperature  -40 to +80°C
 Dimensions  122 (127 N) x 56 x 44 mm
 Weight  329 g (F-connector)

 345 g (N-connector)

   
  Options

 Sep. DC power input

 Customized LO frequency

 SMA output connector (waterproof)

   
 Enclosed accessories

 O-ring

 Screw M4 x 8 4 pcs

   

* ±10 kHz within -10° to +70°C

   ±25 kHz within -40° to +60°C

   ±100 kHz within -30° to +60°C

   ±150 kHz within -30° to +60°C

   ±250 kHz within -30° to +60°C

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) Quattro DRO LNB (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-quattro-dro-lnb-low-noise-block.html

 General Specification:

 

 Noise figure typical  0.9 dB
 Gain typ  52 dB
 Gain variation  ±4 dB each band, ±0.4 dB within 30 MHz
 LO stability (over temp.)  ±3 MHz
 Aging drift  ±500 kHz max
 Phase noise typ  -75 dBc @ 1 kHz

 -85 dBc @ 5 kHz

 -95 dBc @ 10 kHz

 -110 dBc @ 100 kHz

 -115 dBc @ > 1 MHz

 Input  Circular waveguide 18 mm
 Cross polarization  31.5 dB min
 LO radiation  -60 dBm
 Image rejection  50 dB min
 1 dB gain compression point   +5 dBm
 IP3  +15 dBm
 DC power  12-24V / 180 mA typ on each polarization (the DC can be feed through

 any of the two connectors of each polarization. The LNB chooses the output on each polarization with the highest voltage input)

 Operating temperature  -30 to +60°C
 Storage temp. range  -40 to +80°C
 Output connectors (waterproof)    F-connectors 75 ohm or N-connectors 50 ohm
 Output VSWR  2:1 max
 Weight  1675 g (F-connectors)

 1750 g (N-connectors)

 Options  High stability LO, ±1 MHz over temp.

 High stability LO, ±1.5 MHz over temp.

 High stability LO, ±2 MHz over temp.

 Low gain

 Low output VSWR, 1.55:1

 
 Accessories  Adapter C120/C120

 Adapter Prodelin

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Swedish Microwave (SMW) X-Band PLL LNB (Configurator)]]> http://www.all4sat.com/index.php/swedish-microwave-smw-x-band-pll-lnb-1.html

Key Features:

- Built-in TX reject filter

- High IP3

- Low phase noise

- Low power consumption

- Small size & Low weight

 

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 0.00

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1207H N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1207h-n-connector.html

Specifications:

- Noise figure: 0.7 dB

- L.O. stability: ±25 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 340.63

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1207H F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1207h-f-connector.html

Specifications:

- Noise figure: 0.7 dB

- L.O. stability: ±25 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 318.22

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1108H F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1108h-f-connector.html

Specifications:

- Noise figure: 0.8 dB

- L.O. stability: ±10 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 370.89

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1107H F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1107h-f-connector.html

Specifications:

- Noise figure: 0.7 dB

- L.O. stability: ±10 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 343.99

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1109H N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1109h-n-connector.html

Specifications:

- Noise figure: 0.9 dB

- L.O. stability: ±10 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 423.30

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1108H N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1108h-n-connector.html

Specifications:

- Noise figure: 0.8 dB

- L.O. stability: ±10 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 393.30

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat C-Band PLL LNB 3120 N-Connector]]> http://www.all4sat.com/index.php/norsat-c-band-pll-lnb-3120-n-connector.html

Norsat Advantages:

- Norsat LNBs are graded by Stability and Noise Temperature to provide the perfect balance between required performance and cost

- Proven reliability for lower lifetime costs

- Excellent DRO LO stability to control receiver drift and employ lower bit rates or narrower space segment

- Excellent Phase Noise to Lower Carrier to Noise margins, improving BER

 

Specifications:

- Noise temperature: 20K

- L.O. stability (over temperature excl offset): ±5 kHz

- Phase noise (SSB): -73 dBc/Hz at 1kHz, -83 dBc/Hz at 10kHz, -93 dBc/Hz at 100kHz

- Input VSWR: 2.2 : 1

- Output VSWR: 2.2 : 1

- Conversion gain: 62 dB

- Output P1dB: 9 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 330 mA

- Input Waveguide: CPR 229G

- Dimensions: 180 (L) x 100 (W) x 70 (H) mm (7.1 x 4.0 x 2.8 in)

- Weight: 700g / 25 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 442.60

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat C-Band PLL LNB 3515 F-Connector]]> http://www.all4sat.com/index.php/norsat-c-band-pll-lnb-3515-f-connector.html

Norsat Advantages:

- Norsat LNBs are graded by Stability and Noise Temperature to provide the perfect balance between required performance and cost

- Proven reliability for lower lifetime costs

- Excellent DRO LO stability to control receiver drift and employ lower bit rates or narrower space segment

- Excellent Phase Noise to Lower Carrier to Noise margins, improving BER

 

Specifications:

- Noise temperature: 15K

- L.O. stability (over temperature excl offset): ±25 kHz

- Phase noise (SSB): -73 dBc/Hz at 1kHz, -83 dBc/Hz at 10kHz, -93 dBc/Hz at 100kHz

- Input VSWR: 2.2 : 1

- Output VSWR: 2.2 : 1

- Conversion gain: 62 dB

- Output P1dB: 9 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 330 mA

- Input Waveguide: CPR 229G

- Dimensions: 180 (L) x 100 (W) x 70 (H) mm (7.1 x 4.0 x 2.8 in)

- Weight: 700g / 25 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 280.13

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band External Reference LNB 1009X F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-external-reference-lnb-1009x-f-connector.html

Norsat Advantages:

- Norsat 1000X LNB is graded by Noise Figure to provide the perfect balance between performance and cost

- Proven reliability for lower lifetime costs

- Best PLL LO stability to control receiver drift and employ lowest bit rates or narrowest space segment

- Excellent Phase Noise to lower Carrier to Signal Noise margins, improving BER

- Solid packaging

 

Specifications:

- Noise figure: 0.9 dB

- L.O. stability: Phase Locked to External Reference

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 8 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 300 mA

- Input Waveguide: WR75

- Dimensions: 135 (L) x 66 (W) x 40 (H) mm (5.3 x 2.6 x 1.6 in)

- Weight: 480g / 16.9 oz

- External Ref Frequency: 10MHz (sine-wave), -10 to 0 dBm

- Temperature Range: -40C to +60C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 544.85

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band External Reference LNB 1009X N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-external-reference-lnb-1009x-n-connector.html

Norsat Advantages:

- Norsat 1000X LNB is graded by Noise Figure to provide the perfect balance between performance and cost

- Proven reliability for lower lifetime costs

- Best PLL LO stability to control receiver drift and employ lowest bit rates or narrowest space segment

- Excellent Phase Noise to lower Carrier to Signal Noise margins, improving BER

- Solid packaging

 

Specifications:

- Noise figure: 0.9 dB

- L.O. stability: Phase Locked to External Reference

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 8 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 300 mA

- Input Waveguide: WR75

- Dimensions: 135 (L) x 66 (W) x 40 (H) mm (5.3 x 2.6 x 1.6 in)

- Weight: 480g / 16.9 oz

- External Ref Frequency: 10MHz (sine-wave), -10 to 0 dBm

- Temperature Range: -40C to +60C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 567.26

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat C-Band PLL LNB 3515 N-Connector]]> http://www.all4sat.com/index.php/norsat-c-band-pll-lnb-3515-n-connector.html

Norsat Advantages:

- Norsat LNBs are graded by Stability and Noise Temperature to provide the perfect balance between required performance and cost

- Proven reliability for lower lifetime costs

- Excellent DRO LO stability to control receiver drift and employ lower bit rates or narrower space segment

- Excellent Phase Noise to Lower Carrier to Noise margins, improving BER

 

Specifications:

- Noise temperature: 15K

- L.O. stability (over temperature excl offset): ±25 kHz

- Phase noise (SSB): -73 dBc/Hz at 1kHz, -83 dBc/Hz at 10kHz, -93 dBc/Hz at 100kHz

- Input VSWR: 2.2 : 1

- Output VSWR: 2.2 : 1

- Conversion gain: 62 dB

- Output P1dB: 9 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 330 mA

- Input Waveguide: CPR 229G

- Dimensions: 180 (L) x 100 (W) x 70 (H) mm (7.1 x 4.0 x 2.8 in)

- Weight: 700g / 25 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 298.80

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat C-Band PLL LNB 3120 F-Connector]]> http://www.all4sat.com/index.php/norsat-c-band-pll-lnb-3120-f-connector.html

Norsat Advantages:

- Norsat LNBs are graded by Stability and Noise Temperature to provide the perfect balance between required performance and cost

- Proven reliability for lower lifetime costs

- Excellent DRO LO stability to control receiver drift and employ lower bit rates or narrower space segment

- Excellent Phase Noise to Lower Carrier to Noise margins, improving BER

 

Specifications:

- Noise temperature: 20K

- L.O. stability (over temperature excl offset): ±5 kHz

- Phase noise (SSB): -73 dBc/Hz at 1kHz, -83 dBc/Hz at 10kHz, -93 dBc/Hz at 100kHz

- Input VSWR: 2.2 : 1

- Output VSWR: 2.2 : 1

- Conversion gain: 62 dB

- Output P1dB: 9 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 330 mA

- Input Waveguide: CPR 229G

- Dimensions: 180 (L) x 100 (W) x 70 (H) mm (7.1 x 4.0 x 2.8 in)

- Weight: 700g / 25 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 427.45

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ka-Band DRO LNB 9000 N-Connector]]> http://www.all4sat.com/index.php/norsat-ka-band-dro-lnb-9000-n-connector.html

Specifications:

- Noise figure: 1.3 dB

- L.O. stability (over temperature excl offset): ±1 MHz

- Phase noise (SSB): -50 dBc/Hz at 1kHz, -65 dBc/Hz at 10kHz, -90 dBc/Hz at 100kHz

- Input VSWR: 2.5 : 1

- Output VSWR: 2.3 : 1

- Conversion gain: 55 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 175 mA

- Input Waveguide: WR42

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.4 x 1.7 x 1.7 in)

- Weight: 350g / 12.5 oz

- Temperature Range: -40°C to + 60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 324.95

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ka-Band DRO LNB 9000 F-Connector]]> http://www.all4sat.com/index.php/norsat-ka-band-dro-lnb-9000-f-connector.html

Specifications:

- Noise figure: 1.3 dB

- L.O. stability (over temperature excl offset): ±1 MHz

- Phase noise (SSB): -50 dBc/Hz at 1kHz, -65 dBc/Hz at 10kHz, -90 dBc/Hz at 100kHz

- Input VSWR: 2.5 : 1

- Output VSWR: 2.3 : 1

- Conversion gain: 55 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 175 mA

- Input Waveguide: WR42

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.4 x 1.7 x 1.7 in)

- Weight: 350g / 12.5 oz

- Temperature Range: -40°C to + 60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 296.93

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1208H N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1208h-n-connector.html

Specifications:

- Noise figure: 0.8 dB

- L.O. stability: ±25 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 319.34

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1208H F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1208h-f-connector.html

Specifications:

- Noise figure: 0.8 dB

- L.O. stability: ±25 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 296.93

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1109H F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1109h-f-connector.html

Specifications:

- Noise figure: 0.9 dB

- L.O. stability: ±10 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 397.78

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1209H N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1209h-n-connector.html

Specifications:

- Noise figure: 0.9 dB

- L.O. stability: ±25 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 298.05

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1209H F-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1209h-f-connector.html

Specifications:

- Noise figure: 0.9 dB

- L.O. stability: ±25 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 275.64

]]> Sun, 01 Aug 2010 07:52:38 +0000 <![CDATA[Norsat Ku-Band PLL LNB 1107H N-Connector]]> http://www.all4sat.com/index.php/norsat-ku-band-pll-lnb-1107h-n-connector.html

Specifications:

- Noise figure: 0.7 dB

- L.O. stability: ±10 kHz

- Phase noise (SSB): -75 dBc/Hz at 1kHz, -85 dBc/Hz at 10kHz, -95 dBc/Hz at 100kHz

- Input VSWR: 2.0 : 1

- Output VSWR: 2.0 : 1

- Conversion gain: 62 dB

- Output P1dB: 5 dBm

- Power requirements: +15 to +24 V supplied through center conductor of IF cable

- Current drain: 170 mA

- Input Waveguide: WR75

- Dimensions: 110 (L) x 42 (W) x 42 (H) mm (4.3 x 1.7 x 1.7 in)

- Weight: 300g / 10.6 oz

- Temperature Range: -40°C to +60°C

More technical product information can be found on the datasheet. Please use our PDF download option.

Price:€ 366.40

]]> Sun, 01 Aug 2010 07:52:38 +0000